Lanai and Patio Enclosures in Plant City, FL - True Aluminum, Central Florida outdoor living

Lanai and Patio Enclosures in Plant City, FL

Real Google reviews from True Aluminum customers around Plant City - tap a pin to read one. Pin positions are approximate. Map data © OpenStreetMap contributors.

Lanai and Patio Enclosures in Plant City, FL

5.0 Stars · Serving Central Florida since 2009

Plant City is our home base. The yard is at 4000 N Frontage Rd, so a lanai, patio enclosure, or pool cage here is a local crew, not a dispatch from another county. We measure, pull the permit, and give you the price in writing before anyone starts.

Call (863) 804-6021. Licensed SCC131151391.

Why Install a Pool Cage in Florida?

  • Pest Protection: Keep mosquitoes, wasps, and other pests out
  • Debris Control: Block falling leaves, grass clippings, and outdoor mess
  • UV Reduction: Lower sun exposure and extend the life of your pool finish
  • Safety First: Deter pets and young children from unsupervised pool access
  • Lower Maintenance: Reduce cleaning time and chemical usage
  • Increased Comfort: Enjoy poolside lounging without the bugs or heat
Pool cage in Plant City, FL with aluminum frame over the pool
A Plant City pool cage on a stamped concrete deck.

What Are Florida Pool Cages Made Of?

We use only top-grade materials designed for Florida durability:

  • Aluminum Framework: Lightweight, rust-resistant, and hurricane-rated
  • UV-Resistant Screens: Blocks harmful rays while keeping airflow
  • Reinforced Fasteners: Built to withstand wind and weather
  • Anchoring Systems: Secures the cage to your pool deck or patio
Lanai and patio enclosure in Plant City, FL
Screened patio enclosure tied into a Plant City home.

Benefits of Adding a Sunroom

  • Year-Round Use: Insulated and optionally climate-controlled for every season
  • Natural Light: Large windows maximize sunlight while keeping the elements out
  • Increased Home Value: Boost resale potential with usable indoor space
  • Custom Layouts: Choose from a wide range of sizes, finishes, and layouts
  • Energy Efficiency: Well-insulated walls and roofing options that keep the cooling load down

What Goes Into a Florida Sunroom?

We only use materials designed to stand up to Florida's heat, storms, and humidity:

  • Framing: Aluminum or vinyl-clad for strength and weather resistance
  • Windows: Tempered glass, insulated glass, or Low-E energy-saving glass
  • Roofing: Insulated panel roofs or tie-in roofing that matches your home
  • Flooring: Compatible with tile, concrete, or luxury vinyl
  • Cooling Ready: We build and insulate the room so a licensed HVAC contractor can tie it into your system afterward. Aluminum structures are our license, SCC131151391, so we frame for it and leave the mechanical work to the trade that holds that license.

Design Options & Custom Features

No two homes - or pools - are the same. We offer fully customized designs:

  • Roof Style: Mansard, gable, dome, or custom
  • Screen Type: Privacy screen, pet screen, UV-blocking mesh
  • Entry Points: Screen doors, double access gates, lockable doors
  • Color Choices: White, bronze, black aluminum framing
  • Add-Ons: Lighting, fans, planter shelves, extended lanais

Sunroom Styles & Custom Features

Whether you're looking for a cozy corner or a spacious extension, we build sunrooms to match your vision:

Custom options include French doors or sliding glass doors, decorative trim and a siding match to the house, and framing detailed so a licensed electrician can run power for ceiling fans, recessed lighting and cable once the room is closed in. We build the aluminum structure; the electrical hookup belongs to the trade licensed for it.

  • Studio Sunroom: Sloped roof, clean lines, modern look
  • Cathedral Sunroom: Vaulted ceiling for more light and airiness
  • Gabled Sunroom: Triangular roof adds dimension and elegance
  • Integrated Sunroom: Seamlessly blends into your home's existing roofline

Add Value & Curb Appeal

A pool cage is the largest thing in most Florida backyards, so its lines and color change how the whole house reads from the yard. We size the beams to the span instead of overbuilding them, match the frame color to your trim, and keep the sight lines clean. Whether you are getting the house ready to sell or planning to stay in it, a well-built cage is what keeps the pool in use instead of in maintenance.

Areas We Serve

We install aluminum pool cages in:

Our local crews are trained, licensed, and Florida code-compliant.

Related Services from True Aluminum

Built in Plant City, Serving Hillsborough County

True Aluminum is headquartered at 4000 N Frontage Rd in Plant City, and that is where the crews, the trucks and the fabrication work start every morning. Being based in Hillsborough County means our people already know which addresses fall under the city building department and which fall under the county, and it keeps drive time off jobs in Plant City, Brandon, Valrico and Dover.

We work east into Polk County as well, so Lakeland and Winter Haven get the same crews, and north toward Wesley Chapel. Aluminum specialty structures are the only thing we are licensed for, license SCC131151391, and that is the only work we take. If you want to know who would actually show up at your house, meet the team.

What a Pool Cage Costs in Plant City and What Drives the Price

Florida contractors publish new aluminum pool cage work at roughly $12 to $25 per square foot, and a full enclosure commonly totals $12,000 to $30,000. Screening an existing covered patio or deck is much cheaper, about $10 to $25 per square foot, because the roof and slab are already paid for. National figures for sunrooms run higher: roughly $80 to $230 per square foot for a three-season room and $200 to $400 for a fully conditioned four-season room.

People ask what a 20x20 screened-in porch costs, and the square footage is the least interesting part of the answer. Four hundred square feet under an existing roof is a completely different job from four hundred square feet that needs new roof framing, and the price follows the attachment method, the roof tie-in, the number of doors and the uplift requirements at your address more than it follows the dimensions.

Those are general market ranges for Central Florida, pulled from public cost data and other contractors' published pricing. They are not True Aluminum prices and they are not a quote. Call (863) 804-6021 and we will measure the job and give you a real number in writing.

  • Footprint: the square footage under screen is the base of every estimate.
  • Height: taller walls need heavier uprights and more beam, so cost per square foot rises with the ceiling.
  • Roof style: flat pan is the floor, mansard costs more, gable and dome cost more again.
  • Screen grade: standard fiberglass is cheapest, no-see-um and pet-grade mesh add per panel.
  • Existing structure: a sound slab or footer that can be reused saves real money, a failing one adds work before the frame goes up.

Patio and Deck Screen Enclosures

Not every screened space has a pool under it. Patio enclosures and deck enclosures are their own job: we anchor to your existing slab or deck, tie the frame into the house wall, and either screen under the roof you already have or build a new roof over it. That last decision is the one that moves the budget, so we settle it on the first visit.

Door placement is worth thinking about before we build rather than after. Most homeowners want one door to the yard and one to the pool deck or driveway, and self-closing hardware matters if children use the space. On decks we check that the framing can carry the anchors before anything is ordered, because a screen enclosure loads a deck differently than furniture does.

Permits and Inspections in Plant City

Every enclosure we build is permitted. A pool cage or screen enclosure is a structural aluminum assembly, and structural work is excluded from Florida's 2026 under-$7,500 permit exemption, so a small job still needs a permit. Plant City addresses inside the city go through the city building division; addresses outside it go through Hillsborough County. We confirm which one your parcel falls under before we quote, then pull the permit, upload the sealed drawings, meet the inspectors and close the permit out.

The normal sequence is straightforward: contract, engineered drawings for your specific structure and wind exposure, permit application, approval, build, then inspection. Florida also requires a recorded Notice of Commencement filed with the permit office before the first inspection when the contract is over $5,000, and we walk you through that.

If the cage is doing double duty as your pool barrier, the Florida Building Code allows a standard screen enclosure to count as all or part of the required barrier, provided it meets every barrier requirement on its own, including height, no climbable or squeeze-through gaps, and self-closing, self-latching doors. Your inspector signs off on that at final. If you want a separate perimeter, aluminum fencing is the other route.

A Plant City Pool Cage Rebuild

Nicole had been in her Plant City house for more than ten years and her pool cage looked it: sagging panels, tired hardware, a structure most contractors would have quoted as a full teardown. We looked at the frame first, because the frame is what makes that call. It was straight and the anchors were sound, so we saved it, rehabilitated the structure and rescreened the whole cage instead of selling her a new one.

That is the standard we apply to every rescreen and repair call in Plant City. If the aluminum is good, you should be paying for screen and hardware, not for a replacement. If the frame is corroded at the base or the anchors have failed, we will tell you that too, and show you why. The video below is Nicole's job.

The same crews handle the rest of the exterior on these visits, from a carport over the driveway to storm shutters on the windows before hurricane season.

Ready to Upgrade Your Outdoor Living?

Whether it's a bug-free pool cage or a light-filled sunroom you're after, we'll help you create the perfect extension of your home. Call (863) 804-6021 or schedule your free consultation online - and let's build something great, together.

Watch: Nicole Green's Pool Cage Rehab in Plant City, FL
Nicole Green's Pool Cage Rehab in Plant City, FL

Nicole Green's Pool Cage Rehab in Plant City, FL. After more than 10 years in her Plant City home, Nicole's old pool cage was a mess. Instead of a full replacement, True Aluminum saved the structure and rehabilitated the entire cage.

Read the transcript

so instead of ripping the whole thing out we were able to keep our cage and they just did a rehab we needed true aluminum services because we've lived in our house for over 10 years and our pool cage needed to be redone the screens were falling out it was just a mess i heard about true aluminum services through a google search it was the first company that came up and they had really great reviews so we went with them and we couldn't have been happier our experience with true aluminum was awesome we called up for an estimate and jeff came out did the estimate and we found it to be the best price that we went with it here the manager came out and started out the job well our original plan was to have the whole cage ripped out but they came out and did an estimate and said that the bones were actually really good in our cage so instead of ripping the whole thing out we were able to keep our cage and they just did a rehab which means they replaced the screens they replaced the spline they replaced all of the hardware all of the hurricane clips and put a new kick plate around the outside so it saved us a lot of money and it looks great my favorite part of the job is really all of it we had screens falling out so we had bugs inside spider webs we had leaves falling in our pool and now with all the screens being redone we don't have any bugs we don't have leaves in our pool it's super clean and i absolutely love it another one of my favorite parts about it is the kick plate my husband used to go around with the weed whacker and he would cut the screens over and over and we'd have to try to replace them ourselves but now we have this awesome kick plate but it doesn't matter if he runs into it because it's metal on the bottom would i recommend true to my friends and family absolutely it was an awesome experience from beginning to end and we're so happy with the job you

Ready to start your Plant City project?

Licensed and family-owned in Central Florida since 2009. One accountable team handles your Plant City aluminum project from first estimate to final cleanup.

FAQ

Plant City FAQs

The questions we answer most on estimates here.

What is the average cost of a screen enclosure in Florida?
Florida contractors publish screening an existing covered patio at roughly $10 to $25 per square foot, and a new pool screen enclosure at roughly $12 to $25 per square foot, with most complete cages totaling $12,000 to $30,000. National averages you will find online run lower and tend to be out of date for this market. Those are general market ranges rather than a True Aluminum quote, and the drivers are size, height, roof style, screen grade and whether the existing slab or footer can be reused.
How much would a 20x20 screened-in porch cost?
Size alone does not set the price, which is why nobody honest quotes a 20x20 sight unseen. Four hundred square feet under an existing roof is a fraction of the cost of four hundred square feet that needs new roof framing built over it. Attachment method, roof tie-in, the number of doors and the uplift requirements for your address matter more than the dimensions. Public Florida data puts screening an existing covered space at roughly $10 to $25 per square foot, which is the fairest starting point for a rough idea.
Are pool screen enclosures worth it?
For most Plant City pools, yes, and the case is maintenance rather than looks. A cage keeps leaves, insects and lawn debris out of the water, which cuts skimming time, chemical use and evaporation through a long Florida summer. It also adds shade over the deck and a physical barrier around the water. Buyers here expect one, so the absence of a cage is more noticeable at resale than the presence of one.
Who issues the permit for a pool cage in Plant City?
It depends on which side of the city line your parcel sits on: the City of Plant City building division for addresses inside the city, Hillsborough County for addresses outside it. We confirm the jurisdiction before quoting, then pull the permit, submit the engineered drawings, meet the inspectors and close it out. You do not deal with the building department at any point.
Do you build pool cages outside of Plant City in Hillsborough County?
Yes. Plant City is our headquarters, and we regularly build in Brandon, Valrico, Dover and the surrounding Hillsborough communities, along with Wesley Chapel to the north. We also cross into Polk County for Lakeland and Winter Haven work. If you are not sure your address is in range, call and ask before you spend time on plans.
Can you convert my existing Plant City lanai into a sunroom?
Often, yes, and the first question is structural: can the existing footer and frame carry glass, which is far heavier than screen. If it can, converting is cheaper than starting over. It is a permitted job either way, and if you want the room to count as livable square footage it also needs insulation and a permanent cooling source, which a licensed HVAC contractor connects after we finish the structure.
Are pool cages required in Florida?
No state law requires a pool cage, though many HOAs effectively expect one and pool barrier rules do apply to your property. Under the Florida Building Code a standard screen enclosure can serve as all or part of the required pool barrier, as long as it meets every barrier requirement on its own, including height, no climbable or squeeze-through gaps, and self-closing, self-latching doors. Your building inspector confirms that at final inspection.
Can a pool cage withstand hurricanes?
A properly engineered cage is designed for the wind loads the Florida Building Code requires at your address, and that engineering is part of the permit package rather than a marketing claim. Screen is designed to give before the frame does, so panel loss in a severe storm is normal and is a far cheaper outcome than a frame failure. The details that decide it are anchor type and spacing, fastener quality, and honest beam sizing for the span.
Does a sunroom count as livable square footage in Florida?
It can, if it is insulated and served by a permanent cooling source and the work is permitted and inspected as conditioned space. A three-season room with single glazing and no cooling does not count, however nice it is. We build the structure to that standard when that is your goal, and a licensed HVAC contractor handles the mechanical tie-in.
What is the difference between a pool screen and a pool cage?
People use both words for the same thing most of the time. In practice a pool cage means the full screened structure enclosing the pool, with its own frame, roof and doors, while pool screen usually refers to the mesh itself or to individual panels. If someone quotes you a pool screen job, ask whether they mean rescreening panels or building a structure, because the two are very different numbers.

Need an aluminum contractor in Plant City?

Our main Lakeland location, Plant City, Bartow, and a Central Florida wide service area. We build for homeowners and businesses throughout Polk, eastern Hillsborough, and Pasco counties.

Our Locations

True Corp

Reviews from homeowners who hire us

3,244 Google reviews across the True brands.

Tap to Call (863) 804-6021 Or schedule online